|
#1
|
|||
|
|||
Cabrinha Delux harness quick release attachment
Hey Guys
Just go this Harness and i cant figure out for the life of me on how to attach it. Anyone know how??? Thanks Alex photo a.jpg |
#2
|
||||
|
||||
Alex,
I haven't seen one of these in person before. I did send an email to someone at Cabrinha with a request for information. Anyway, you usually pass the release pin through the gray loop, then bend it back and secure it with a loop, sleeve or ? I don't see the loop or sleeve in your photo, is there one? Quote:
__________________
FKA, Inc. transcribed by: Rick Iossi |
#3
|
|||
|
|||
Cabrinha Harness quick release reataching problems
Hi
No there is no loop sleave and the grey loop is to small/short to pass around and insert the pin. Maybe someone at Cabrinha can help. Thanks Alex |
#4
|
|||
|
|||
I found this on a UK kiteforum
Looks like im not the only one with this issue
""I have got my hands on a 2nd hand 2010 Cabrinha Deluxe waist harness, the one with the changeable Q/R handlepass leash attachment. However it has arrived with the handlepass leash attachment undone and i am unsure how to put it back together. Does anyone have any ideas? All the ways i have tried, it comes undone very easily, by just pulling on the handlepass leash attachment cord (the cord that goes accross the back of the harness) Would appreciate any info, suggestions or help anyone can give. Cheers""" |
#5
|
|||
|
|||
Finally got it
OK Rick
You where correct. The grey loop goes around the metal ring and back into the plastic tubing. Thanks Alex |
#6
|
||||
|
||||
Sorry, I just had a chance to read this, but the gray loop does go around the metal "D" ring, then the pin goes through the gray line and dead ends into the PU cover on the leash line. It looks like you have all figured this out already.
__________________
Todd Gréaux Cabrinha Kites |
|
|